Heading 8708 · Parts and accessories of the motor vehicles of headings 8701 to 8705

8708.99

Parts and accessories of the motor vehicles of headings… — Other:

Calculate duties for this code

Official notices

Actions of the President, the USTR or U.S. Customs and Border Protection (CBP) that name this code.

Mentioned in Chapter 99

The parts of Chapter 99, in the 2026 HTS Revision 22, that list HTS 8708.99, a broader code that includes it, or a narrower code within it.

U.S. noteExcerptHeadings that refer to it
U.S. note 16(c)(vi)(c) Headings 9903.82.02–9903.82.26 apply to the full customs value of articles classifiable in the provisions of the HTSUS enumerated in the following lists. For articles classified in the listed provisions that are not in chapters 72, 73,…9903.82.01, 9903.82.03, 9903.82.05, 9903.82.09
U.S. note 16(c)(vii)(vii) Derivative steel articles: [Compiler’s note: List may begin on a subsequent page; read numbers from left to right.]9903.82.01, 9903.82.03, 9903.82.05, 9903.82.09, 9903.82.16
U.S. note 16(c)(x)(c) Headings 9903.82.02–9903.82.26 apply to the full customs value of articles classifiable in the provisions of the HTSUS enumerated in the following lists. For articles classified in the listed provisions that are not in chapters 72, 73,…9903.82.01, 9903.82.03, 9903.82.07, 9903.82.08, 9903.82.12, 9903.82.17
U.S. note 19(k)(k) The rates of duty in heading 9903.85.08 apply to all entries of derivative aluminum products classifiable in the following HTSUS provisions, unless the derivative aluminum product was processed in another country from aluminum articles…9903.85.68
U.S. note 19(s)(s) The rates of duty set forth in heading 9903.85.15 apply to all entries of derivative aluminum products of the United Kingdom classifiable in the following provisions of the HTSUS, unless the derivative aluminum product was processed in…—
U.S. note 20(f)(f) Heading 9903.88.03 applies to all products of China that are classified in the following 8-digit subheadings, except products of China granted an exclusion by the U.S. Trade Representative and provided for in (1) heading 9903.88.13 and…9903.88.03, 9903.88.09
U.S. note 20(gg)(II)(62)(68)(68) Anti-vibration control components of ASTM A519 1020 cold-drawn precision mechanical tubing of steel, valued over $0.40 each but not over $0.80, for motor vehicles of headings 8701 to 8705 (other than for tractors suitable for…9903.88.28
U.S. note 20(iii)(219)(219) Front output shafts of Society of Automotive Engineers ("SAE") 1045 carbon steel suitable for use in automatic transmission systems for passenger motor vehicles (described in statistical reporting number9903.88.56
U.S. note 20(iii)(220)(220) Hitches receivers of steel, not suitable for towing applications, each receiver to be clamped onto the rear bumper of a recreational vehicle, such bumpers being square in section and measuring not more than 102 mm on a side…9903.88.56
U.S. note 20(mm)(35)(35) Drive shafts, also known as propeller shafts, that connect a transmission to a differential, allowing a vehicle to move, designed for use in the manufacture of motor vehicles primarily used for amusement, recreation, sporting and off-…9903.88.34
U.S. note 20(nn)(16)(16) EGR coolant tube assemblies of stainless steel for diesel powered vehicles of headings 8701 to 8705 (described in statistical reporting number9903.88.35
U.S. note 20(oo)(37)(37) Wheel hubs of cast iron, for off-road vehicles of headings 8701 to 8705, each weighing 2 kg or more but not exceeding 4 kg (described in statistical reporting number9903.88.36
U.S. note 20(oo)(8)(oo) The U.S. Trade Representative determined to establish a process by which particular products classified in heading 9903.88.03 and provided for in U.S. notes 20(e) and (f) to this subchapter could be excluded from the additional duties…9903.88.36
U.S. note 20(pp)(55)(55) Motor mount kits each consisting of 3 to 5 components, each of stainless-steel or aluminum combined with a heat resistant rubber material and with holes machined for mounting the engine to the car or truck body, designed for use in…9903.88.37
U.S. note 20(pp)(56)(56) Wear bars comprising strips of carbide for the vehicles of9903.88.37
U.S. note 20(qq)(86)(86) Hitches receivers of steel, not suitable for towing applications, each receiver to be clamped onto the rear bumper of a recreational vehicle, such bumpers being square in section and measuring not more than 102 mm on a side (described…9903.88.38
U.S. note 20(qq)(87)(87) Tank holders of steel, designed to be mounted to the external rear bumper of a recreational vehicle, to safely secure portable holding tanks while the vehicle is in motion (described in statistical reporting number9903.88.38
U.S. note 20(ttt)(89)(ii)(34)(iii)(153)(153) Front output shafts of Society of Automotive Engineers ("SAE") 1045 carbon steel suitable for use in automatic transmission systems for passenger motor vehicles (described in statistical reporting number9903.88.67
U.S. note 20(ttt)(89)(ii)(34)(iii)(154)(154) Hitches receivers of steel, not suitable for towing applications, each receiver to be clamped onto the rear bumper of a recreational vehicle, such bumpers being square in section and measuring not more than 102 mm on a side…9903.88.67
U.S. note 20(vv)(154)(154) Castings of aluminum for hub lock assemblies of motor vehicles of heading 8703 (described in statistical reporting number9903.88.43
U.S. note 20(vv)(155)(155) Shift lever weldments, sprockets, shafts, bearing carriers, and rod shifters, all the foregoing being parts of power trains for the motor vehicles of headings 8701 to 8705 (described in statistical reporting number9903.88.43
U.S. note 20(vv)(156)(156) Covers for automobile seats or passenger compartments, of textile fabric, with or without fastening hardware, presented separately or in sets put up for retail sale (described in statistical reporting number9903.88.43
U.S. note 20(vv)(157)(157) Intercooler pipes of cast aluminum, each weighing at least 0.37 kg but not more than 0.643 kg (described in statistical reporting number9903.88.43
U.S. note 20(vv)(158)(158) Racks designed to fit into receiver hitches of vehicles of headings 8701 to 8705, for transporting bicycles (described in statistical reporting number9903.88.43
U.S. note 20(vv)(159)(159) Trailer hitch kits of alloy steel or carbon steel, for the vehicles of headings 8701 to 8705, other than tractors, except including road tractors (described in statistical reporting number9903.88.43
U.S. note 20(xx)(84)(84) Heater coils for use with the motor vehicles of headings 8701 to 8705, composed of steel, copper, aluminum and plastic, each not less than 184 mm and not more than 355 mm in height, not less than 350 mm and not more than 774 mm in…9903.88.45
U.S. note 20(xx)(85)(85) Hitch riser plates of AISI 8620 alloy steel, each weighing not less than 94 g and not more than 96 g (described in statistical reporting number9903.88.45
U.S. note 20(xx)(86)(86) Hitches of powder-coated steel for use with the motor vehicles of headings 8701 to 8705, designed to distribute weight, incorporating an adjustable sway control clamp, an adjustable hitch head and a chrome-plated hitch ball, each ball…9903.88.45
U.S. note 20(xx)(87)(87) Hitches of powder-coated steel for use with the motor vehicles of headings 8701 to 8705, for mounting in the bed of a truck, each incorporating two stationary legs, a head, a cross member, a slider, rail adapters, automatic locking…9903.88.45
U.S. note 20(yy)(114)(114) Front output shafts of Society of Automotive Engineers (“SAE”) 1045 carbon steel suitable for use in automatic transmission systems for passenger motor vehicles (described in statistical reporting number9903.88.46
U.S. note 20(yy)(115)(115) Housings of aluminum used for integrated wheel-end disconnect systems, which lock and disengage the front hubs when switching between 2- and 4-wheel drive (described in statistical reporting number9903.88.46
U.S. note 20(yy)(119)(119) Cargo carriers of powder-coated steel designed to fit into receiver hitches of vehicles of headings 8701 to 8705, each measuring not more than 123 cm by 83 cm by 20 cm, with a capacity not more than 228 kg, incorporating a loading…9903.88.46
U.S. note 30(b)(b) Heading 9903.90.08 applies to all products of the Russian Federation that are classified in the following 8-digit subheadings: [ Compiler's note : List may appear or continue on a subsequent page; blank cells reflect proclaimed…9903.90.08
U.S. note 33(g)(g) Subject to a manufacturer's import adjustment offset amount that may be determined by the Secretary of Commerce under Proclamation 10925 of April 29, 2025 (90 FR 18899), the rates of duty set forth in heading 9903.94.05, 9903.94.42,…9903.94.05, 9903.94.62, 9903.94.63, 9903.94.66, 9903.94.67
U.S. note 33(j)(j) Heading 9903.94.32 sets forth the ordinary customs duty treatment for parts of passenger vehicles and light trucks that are products of the United Kingdom classifiable in the following statistical reporting numbers of the HTSUS…9903.94.32
U.S. note 38(i)(i) Subject to a manufacturer’s import adjustment offset amount that may be determined by the Secretary of Commerce under Proclamation 10984 of October 17, 2025 (90 FR 48451), the rates of duty set forth in heading 9903.74.08 applies to…9903.74.08

Being listed is not owing a duty. A note may list goods that a measure leaves out; whether a heading applies depends on the origin, the date and the product; and the measures on all the goods of a country list no code at all. The calculator says what applies.

In the tariff

  1. 8708Parts and accessories of the motor vehicles of headings 8701 to 8705
  2. Other parts and accessories
  3. 8708.99Other
  4. Parts of tractors suitable for agricultural use
  5. 8708.99.03.00Vibration control goods containing rubberFree
  6. 8708.99.06.00Double flanged wheel hub units incorporating ball bearingsFree
  7. 8708.99.16.00Other parts for power trainsFree
  8. 8708.99.23.00OtherFree
  9. Parts of other tractors (except road tractors)
  10. 8708.99.27.00Vibration control goods containing rubberFree
  11. 8708.99.31.00Double flanged wheel hub units incorporating ball bearingsFree
  12. 8708.99.41.00Other parts for power trainsFree
  13. 8708.99.48OtherFree
  14. 8708.99.48.10Tracklinks for track-laying tractors
  15. 8708.99.48.50Other
  16. Other
  17. 8708.99.53.00Of cast-ironFree
  18. Other
  19. 8708.99.55.00Vibration control goods containing rubber2.5%
  20. 8708.99.58.00Double flanged wheel hub units incorporating ball bearings2.5%
  21. Other
  22. 8708.99.68Other parts for power trains2.5%
  23. 8708.99.68.05Drive shafts
  24. 8708.99.68.10Forged universal joints for vehicles of heading 8703
  25. 8708.99.68.20Forged universal joints for vehicles of heading 8704
  26. 8708.99.68.90Other
  27. 8708.99.81Other2.5%
  28. 8708.99.81.05Brake hoses of plastics, with attached fittings
  29. 8708.99.81.15Double flanged wheel hub units not incorporating ball bearings
  30. 8708.99.81.30Slide-in campers
  31. 8708.99.81.60Cable traction devices
  32. 8708.99.81.80Other