7228

Lines of 7228

1. 7228.10.00Bars and rods, of high-speed steelFree
2. 7228.10.00.10Not cold-formed
3. Cold-formed
4. 7228.10.00.30With a maximum cross-sectional dimension of less than 18 mm
5. 7228.10.00.60With a maximum cross-sectional dimension of 18 mm or more
6. 7228.20Bars and rods, of silico-manganese steel
7. 7228.20.10.00Not cold-formedFree
8. 7228.20.50.00Cold-formedFree
9. Other bars and rods, not further worked than hot-rolled, hot-drawn or extruded
10. 7228.30Of tool steel (other than high-speed steel)
11. 7228.30.20.00Of ball-bearing steelFree
12. 7228.30.40.00Of chipper knife steel, not cold-formedFree
13. 7228.30.60.00OtherFree
14. 7228.30.80OtherFree
15. 7228.30.80.05Of high-nickel alloy steel
16. 7228.30.80.10Concrete reinforcing bars and rods
17. Other
18. 7228.30.80.15With a diameter or cross section measuring less than 76 mm
19. 7228.30.80.41With a diameter or cross section measuring 76 mm or more but not exceeding 152 mm
20. 7228.30.80.45With a diameter or cross section measuring 152 mm or more but not exceeding 228 mm
21. 7228.30.80.70With a diameter or cross section exceeding 228 mm
22. 7228.40.00.00Other bars and rods, not further worked than forgedFree
23. 7228.50Other bars and rods, not further worked than cold-formed or cold-finished
24. 7228.50.10Of tool steel (other than high-speed steel)Free
25. 7228.50.10.10Of ball-bearing steel
26. Other
27. With a maximum cross-sectional dimension of less than 18 mm
28. 7228.50.10.20Of round or rectangular cross section with surfaces ground, milled or polished
29. 7228.50.10.40Other
30. With a maximum cross-sectional dimension of 18 mm or more
31. 7228.50.10.60Of round or rectangular cross section with surfaces ground, milled or polished
32. 7228.50.10.80Other
33. 7228.50.50OtherFree
34. 7228.50.50.05Of high-nickel alloy steel
35. Other
36. 7228.50.50.15With a diameter or cross section measuring less than 76 mm
37. 7228.50.50.40With a diameter or cross section measuring 76 mm or more but not exceeding 228 mm
38. 7228.50.50.70With a diameter or cross section exceeding 228 mm
39. 7228.60Other bars and rods
40. 7228.60.10Of tool steel (other than high-speed steel)Free
41. 7228.60.10.30Of ball-bearing steel
42. 7228.60.10.60Other
43. Other
44. 7228.60.60.00Not cold-formedFree
45. 7228.60.80.00Cold-formedFree
46. 7228.70Angles, shapes and sections
47. 7228.70.30Hot-rolled, not drilled, not punched and not otherwise advancedFree
48. 7228.70.30.10U, I, H and T sections
49. Other
50. With a maximum cross-sectional dimension of 76 mm or more
51. 7228.70.30.20Angles
52. 7228.70.30.41Other
53. With a maximum cross-sectional dimension of less than 76 mm
54. 7228.70.30.60Angles
55. 7228.70.30.81Other
56. 7228.70.60.00OtherFree
57. 7228.80.00.00Hollow drill bars and rodsFree